Prime 2 - EPOXY | Primers | Colourtrend Ireland - Colourtrend Paints

Our response to COVID-19

Prime 2 - EPOXY

Superior Adhesion

Adhesion to difficult surfaces: laminate, MDF, gloss paint, varnish +  stainless steel

  • Anti-corrosive
  • Low odour, easy to use + clean up with water.

    Note

    On-screen and printer colour representations may vary from actual paint colours. Due to the higher level of dark pigment being present, deep hue colours may be less resistant to marking and/or burnishing.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 4-6 hours.

    Drying Time

    2-4 hours.

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 6-8 hours.

    Drying Time

    2-4 hours.

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 6-8 hours.

    Drying Time

    2-4 hours.

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 6-8 hours.

    Drying Time

    4-6 hours

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 6-8 hours.

    Drying Time

    4-6 hours

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 4-6 hours.

    Drying Time

    2-4 hours

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 4-6 hours.

    Drying Time

    4-6 hours.

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.=

    Information

    Information

    When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.

    Coats

    Re-coat after 4-6 hours.

    Drying Time

    4-6 hours.

    Tools

    If applying by brush, use a good quality synthetic brush

    Clean up

    Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.